The Heater Routing and Heaters columns are partially synced: changing the count or current in one column updates the other. Ground current is computed via KCL.
| Parameter | Heater Routing | Heaters | Ground Traces |
|---|---|---|---|
| Resistivity | uΩ·m | uΩ·m | uΩ·m |
| Length | mm | mm | mm |
| Width | µm | µm | µm |
| Height | nm | nm | nm |
| Count | route | heater | ground |
| Current | mA | mA |
| Parameter | Heater Routing | Heaters | Ground Traces |
|---|---|---|---|
| Count | |||
| Current | [mA] | [mA] | [mA] |
| Resistance | [Ω] | [Ω] | [Ω] |
| Power | [mW] | [mW] | [mW] |
| Power Density | [mW/mm] | [mW/mm] | [mW/mm] |
| Total Power | [mW] | [mW] | [mW] |
| Combined Total Current | [mA] | ||
| Combined Total Power | [mW] | ||